FANUC 0i-TD S889: How G50.9 outputs an auxiliary function during axis motion
Start with option availability for PS0010. Check block format for PS5330 and the trigger position for PS5331.
Read article →Technical information about functions and their application conditions. Follow the manuals supplied for the actual CNC and machine configuration.
Technical articles
FANUC option functions, backup files, certification messages and application conditions.
Start with option availability for PS0010. Check block format for PS5330 and the trigger position for PS5331.
Read article →When single direction positioning applies to an axis, G60 finishes the approach from its configured direction. For PS0010, check both the G code and option entitlement; for DS0025, check mirror-image state.
Read article →Trace axis-selection timing first. PS0139 does not show whether the option is installed.
Read article →Check the move after G41.3, machine kinematics and authorization before confusing startup geometry with a missing option.
Read article →No motion after M19 does not prove J853 is missing. Use diagnosis 710 and the request/completion sequence to separate configuration, mode conflicts and builder timeouts.
Read article →Check licensing, mode switching and reference establishment separately. PS0303 is not proof that J852 is absent.
Read article →Separate J777 licensing, axis selection and block-level operation. PS5085 is not a dedicated missing-option test, and PS5421 can indicate a function conflict.
Read article →A rejected G62 and an accepted G62 with no expected slowdown require different checks: compensation, corner conditions and the override range.
Read article →S853, J655 and the total simultaneous-axis limit are separate checks. Diagnose PS0021 after adding axes without treating it as proof of a missing option.
Read article →G37 changes a tool offset as well as measuring a position. Separate PS0010 from PS0080, PS0081 and PS0082 on the specified 31i-B system.
Read article →